Home Learning Methods to Fix Epson Printer Code 0x97

Methods to Fix Epson Printer Code 0x97

by Best Kayak Info

Epson Error Code 0x97 is an alert message your Epson printer’s randomness shield’ displays if there is a hardware issue. There could be a myriad of issues to blame, in the case of a case bankruptcy on the motherboard or early internal component failure. The Epson printer won’t be in a position to print when you receive an Epson printer error code 0x97 displayed on it. If you’re looking to resolve the printer error 0x97 error, you have to follow the steps we have provided below.

Re-connect your Epson printer after disconnecting it

  • First, open the case for your Epson printer and check whether any paper or pieces have been jammed into it. Suppose you spot any papers stuck inside. It is best to remove each paper strap from it.
  • Following this, you need to take out the cartridges that you have within the printer of your Epson printing device.
  • Then, you’ll be required to unplug the USB cable that you will see in the settings of your Epson printing device.
  • Then it would help if you tap to power and switch off your printer.
  • In this case, allow an extended time before plugging the various USB cables out of your Epson printer.
  • Then, you have to switch on the printer and then check if you can tell if the Epson error number 0397 is repaired.
  • If you discover that the issue hasn’t been solved yet, it is suggested to continue with your next steps.

Complete the Installation and Update of drivers

Sometimes spyware, malware, viruses, and trojans on your printer can cause an error code 0x97. This is why you should install the best security for your printer and ensure that you keep your Epson printer current with the most recent malware protection or virus software.

Unplug the printer in an opposite fashion

This troubleshooting technique is in opposition to the previous method of working. In this procedure, it is important to know the reason why ” 0x97 erroneousness ” is being caused by any hardware or software issue :

  • In the beginning, you must hit the power button to switch off the Epson printer.
  • Now, you should make sure to unplug different USB cables.
  • Here, you’ll need to wait for approximately an hour.
  • Then, you’re obliged to hold and press the power button of your printer for approximately 1 minute.
  • If you press your power button, connect the various USB cables.
  • Now, you’ll need to hold the power button on the printer for approximately 1 minute.
  • Then you need to connect the cables again immediately.
  • In this process, it is necessary to plug the power cord back into the cable and then release the button for power.
  • It is also important to verify if your error 0x97 remains on your Epson printer or not.

Clear the printhead and Nozzles of the printer with wet tissue

Suppose you are experiencing ” Epson printer not printing ” regardless of everything you have done. Then, you can get rid of the error code 0x97 off your Epson printer using the following steps :

  • You will need to first disconnect all cabled power from the Epson Printer.
  • Here, you’ll have to open the case of your printer.
  • Now, you must wet soft cloth pieces with warm water.
  • After you have removed the water from it, you’ll need to wash the ink off the tip until clear and free of any ink stuck to it.
  • It is also possible to soak the head of your Epson printer in warm water in a bowl for 10- 12 minutes.
  • Then you can take it off the print head, clean it using a paper towel, and wipe off all ink and water dirt.
  • Dry for a minimum of 15 minutes.
  • After drying, you need to place your printer’s print head Epson printer in the “Print head section.”
  • Afterward, place the cartridges in the correct order in your printer’s “cartridges section.”
  • Then it would help if you turned off your “Epson printer” on it’ll surely resolve this “Epson error code 0x97” problem.

If you’re still having trouble with any Epson error code 0x97 problems in your printer, you can talk to us via the Live Chew the fat feature or the toll-free number on our website. We have a group of printer experts that offer the highest quality technical support available without costing you a hole in your wallet.

Related Articles